Hydraulic Puller 5T Hydraulic Gear Puller Pump 3-Jaw Hydraulic Pinion Puller Kit for Traction Hubs Flanges Gears and Bearings

Specification:
Material: carbon steel + cast iron
Ares travel: 2 inches (50 mm)
Maximum capacity: 5T
Minimum/maximum range: 0 "-5.51" (0-140 mm)
Minimum/maximum transmission: 4.87 "(100-200 mm)
Weight: approx. 7100 g/250.4 oz

Use and precautions:
2. Adjust the jaws to maintain proper distance and angle from pull position.
3. Rotate handle to move piston shaft and increase jaw power to clear object.
4. The maximum stroke of this hydraulic puller is 50mm, please be careful when using it, so you may have to try several times when the object is still in the position which meets the requirements of the stroke.
5. To return the piston start rod, simply use the grooved end of the handle and turn the return rod counterclockwise.
6.Do not overload.
7. Use of oil (GB443-84) N15 at -5 ℃ ~ 45 ℃, the synthesis of spindle oil (GB442-64) in-20 ℃ ~ -5 ℃.
8. The machine uses oil as the medium, so the oil and the machine should be kept together.
9. With new adjustment or long adjustment, the hydraulic extractor can be loaded 2-3 times to eliminate the air cavity because there is a large a of air in the cylinder, and the rod may have a little sudden jump in the start-up. Although the gear puller is not used for a long time, you need to back and forth with the gear puller 2-3 times a month.

List of packages:
1 x hydraulic puller
1 x handle
1 x 2/3 leg extractor bracket
3 x jaws
6 x nuts and bolts
6 x clamp plates binding
1 x nose adapter
1 x carrying case

• Made of forged steel, this hydraulic puller is very strong and durable, with good bearing capacity and long service life..
• It is equipped with 3 traction claws, which can be adjusted up and down, and can be pulled with two or three legs as needed.Suitable for traction hubs, flanges, gears and bearings, with capacity maximum load of 10 tons..
• There is a handle which can be opened, which can be used with very little operation and achieve great pulling force.The safety valve control switch on the pump body is ready to avoid oil pressure overload..
• The hydraulic puller adopts the design of a 360-degree pump head, which is easy to operate and operate. After rotation, it can quickly contact the work center according to the distance between the extractor and the position center..
• QUALITY AFTER-SALES SERVICE: If you have any problems during using, please contact us and we can provide after-sales service for you..